|
Post by grizz1203 on Nov 23, 2011 18:14:11 GMT -6
Well since I just got my quad in September and new to this forum I have done the following: New tires, heated grips, exhaust power tip, winch
|
|
|
Post by themacs4s on Feb 7, 2012 13:30:55 GMT -6
I installed new front, lower A arm, shock mount bushings and seals on my 400ex today.
|
|
|
Post by themacs4s on Feb 15, 2012 7:45:00 GMT -6
I installed a new float needle in the carb. on my 400ex.
|
|
|
Post by themacs4s on Feb 16, 2012 7:25:30 GMT -6
I installed new lower ball joints on the front end of my 400ex.
|
|
|
Post by themacs4s on Feb 19, 2012 10:09:23 GMT -6
I did a top end engine rebuild on a 96' Polaris 300 xpress, that I bought in pieces.
|
|
|
Post by movingman on Mar 15, 2012 21:45:01 GMT -6
Replaced my front brake pads. I think they were about due. What do you think?
|
|
|
Post by movingman on Apr 24, 2012 20:37:18 GMT -6
Getting ready for the weekend. I washed it and put a catch can on the crankcase vent so I would stop getting oil in the air box.
|
|
|
Post by punchy on Feb 27, 2013 20:43:50 GMT -6
That's the club Frankinquad
|
|
|
Post by punchy on Feb 27, 2013 20:50:20 GMT -6
Tuesday took snow tires off put sand tires on. Wednesday Took off sand tires put on snow/ice tires any one for ice or snow this weekend ?
|
|
|
Post by movingman on Mar 7, 2013 6:53:23 GMT -6
I was having issues with getting my bike to start up. So I adjusted the valves and it fires right up now. Just have a few more things to get done and the quad should be ready to get out on the trails again.
|
|
|
Post by themacs4s on Mar 10, 2013 10:02:44 GMT -6
I put on my sand tires, lubed my clutch cable, put on my LOUD exhaust, and tried something to help my axle seals in the sand--a rag and some zip ties to try and keep the sand out. I don't know, we'll see.
|
|
|
Post by themacs4s on Mar 29, 2013 15:29:25 GMT -6
I put my dirt tires on, changed the oil and filter, greased the front end, and put my quiet exhaust back on to help me be incognito.
|
|
|
Post by movingman on Mar 29, 2013 16:40:03 GMT -6
Did the shop rag and zip ties hold up?
|
|
|
Post by themacs4s on Mar 29, 2013 17:26:18 GMT -6
they're still in place, don't know how much if any good they did, but my bearings are still tight.
|
|